FAG Drawn cup needle roller bearings with open ends - SCE1212

✖

Home

Stock Categories

Quality Control

Siemens Module

Japan NACHI Hydraulic Pump

Solenoid Directional Valves

Home>Products>FAG Spindle Bearings>FAG Drawn cup needle roller bearings with open ends - SCE1212 image

FAG Drawn cup needle roller bearings with open ends - SCE1212 image

Back to product page

FAG Drawn cup needle roller bearings with open ends - SCE1212 Codes and sizes

Bearing number:MLE7008HVUJ74S
Size (mm):40x68x15
Bore Diameter (mm):40
Outer Diameter (mm):68
Width (mm):15
d:40 mm
D:68 mm
B:15 mm
C:15 mm
Angle (α):20 °
d1:49.2 mm
d2:46.9 mm
D1:60.91 mm
D2:63.31 mm
a:20 mm
Contact angle α:25 °
rs min:1 mm
r1s min:0.6 mm
f0:8.22
Precision class:P4S
Mass:0.18 kg
Dynamic load, C:10.4 kN
Static load, C0:6.6 kN
Fatigue limit load, Cu:0.4 kN
Nlim (grease):25,000 rpm
Axial displacement K Factor:0.68
Preload level:7
Preload value:0.09 kN
Axial rigidity:92 N/µm
Radial rigidity:205 N/µm
Min operating temperature, Tmin:-20 °C
Max operating temperature, Tmax:120 °C
Characteristic cage frequency, FTF:0.45 Hz
Characteristic rolling element frequency, BSF:8.3 Hz
Characteristic outer ring frequency, BPF0:9.81 Hz
Characteristic inner ring frequency, BPFI:12.19 Hz
da min:45.5 mm
db min:45.5 mm
Da max:62.5 mm
Db max:62.5 mm
r1a max:0.6 mm
ra max:1 mm
D6:51.4 mm

Now our products are exported to lots of countries in the world, such as Mid-east, Europe, America, South America and Southeast Asia, etc. In some area, our products even cover over 50% of the market share.

Welcome to contact us any time!

skype:heyabc

Email:[email protected]

Contact Us

JiNan Hope Hydraulic Co., Itd: Email[email protected]; AddressTianqiao, Beiyuan District, Jinan，Shandong; Phone(Working Time)0531-8299 9953; Fax

Send Now

JiNan Hope Hydraulic Co., Itd

FAG Drawn cup needle roller bearings with open ends - SCE1212 Codes and sizes

Contact Us